|
|
LoRad Cord Sets
LoRad CS-EU
(10A)
EU-version, with Schuko plugs, is the most common standard
throughout Europe. Exceptions are Denmark, Italy, Ireland and Britain.
LoRad 1.5 CS-EU
Screened cord set with LoRad 3x1.5 mm² cable, SWF10
female connector (IEC-320) and SW-EU male plug.
Current rating 10A
LoRad 2.5 CS-EU
A similar cord set but with LoRad 3x2.5 mm² cable.
Current rating 10A. |
 |
|
|
LoRad CS-EU (16A)
LoRad 2.5 CS-EU-16
Screened cord set with LoRad 3x2.5 mm2, SWF16 female connector (IEC-320) and
SW-EU-16 male plug.
Current rating 16A. |
 |
|
|
LoRad BS Cord Sets
LoRad CS-BS British standard, BS1363A. This BS-approved cord
set is available only in CSA 3x1.5 mm² . British (UK) safety standard does
not approve factory produced cord sets of CSA 2.5 mm².
LoRad 1.5 CS-BS
Shielded mains cord set with LoRad 3x1.5 mm2, SWF10 female
connector (IEC-320) and MC-BS male plug. |
|
|
 |
LoRad CS-US
US-version, Nema-15, is the American standard and also
common throughout Asia. The plug is approved Hospital Grade.
LoRad 1.5 CS-US
Screened cord set with LoRad 3x1.5 . mm2,SWF10 female
connector (IEC-320) and SW-US male plug.
Current rating 15A.
LoRad 2.5 CS-US
Screened cord set with LoRad 3x2.5 mm2, SWF10 female
connector (IEC-320) and SW-US male plug.
Current rating 15A. |
|
|
|
The Lorad
Concept
LoRad is a mains flex with patented screening for connection of audio equipment
to 230V mains. The screening minimizes the interference from electric
alternating fields, protecting from both radiation and pick-up. For cancelling
of magnetic alternating fields the LoRad is cabled with a short pitch twisting.
LoRad, the only approved screened mains flex. Owing to the patented design the
drain wire is eliminated and instead the screen is automatically connected to
earth via a green semi-conductive plastic on the earth conductor. This enables
the cable to pass the flex test of 2x30,000 bending strokes without damage, for
safety approval, whereas a drain wire would cut through the insulations during
the test. The LoRad is very flexible owing to the multiwire conductors. Each
conductor is made of 320 tin plated copper wires.
- LoRad stands for Low Radiation of electric and magnetic
alternating fields
- The screen protects your equipment from radiated mains
noise and from RF oick-up.
- Short pitch twisting of the cores cancels the magnetic
alternating fields.
- This will result in a cleaner sound and more accurate
transients.
The screen is ground connected via
a semi-conductive PE on the earth conductor. No drain wire needed. The green
part of the yellow/green earth conductor is of two different green nuances.
Please be aware that the darker green plastic is the semi-conductive part. It
must not touch any live part of the cord set. |
<<< Cord Sets,
Technical Specifications >>>
Go Top
|
