LoRad Screened Mains Flex,
Patented
Lorad 3x1.5 & Lorad 3x2.5
LoRad Screened Mains Flex, Patented LoRad stands for Low Radiation of electric
and magnetic alternating fields. Protects your equipment from radiated mains
noise as well as from RF pick-up.
The screen protects from the electric fields and the short pitch twisting
protects from and cancels the magnetic fields. This will typically result in a
cleaner sound and more accurate transients, which in turn give you a tighter
bass, better 3-Demension presence and stereo definition. Closer to the truth.
Besides this, the human health aspect should be considered. It is
scientifically proven that magnetic alternating fields affect the human cell
growth.
Supra LoRad Screened Mains Flex
The one and only approved for flex applications.
A Swedish world patent.
Applications:
• Hi-Fi and studio systems
• Medical equipments
• Measurement and laboratory equipments
• For people sensitive to electric/magnetic radiation
• In any application where electric/magnetic interference is critical
|
LoRad 1.5 & 2.5
 |
Supra LoRad is the sole audio grade mains cable in the
world with full European safety approval. SUPRA’s screening concept is
patented worldwide by Tommy Jenving.
|
   
Safety approved in compliance with HD 21.5 S3
|
The Lorad Concept
LoRad is a mains flex with patented screening for connection of audio equipment
to 230V mains. The screening minimizes the interference from electric
alternating fields, protecting from both radiation and pick-up. For cancelling
of magnetic alternating fields the LoRad is cabled with a short pitch twisting.
LoRad, the only approved screened mains flex. Owing to the patented design the
drain wire is eliminated and instead the screen is automatically connected to
earth via a green semi-conductive plastic on the earth conductor. This enables
the cable to pass the flex test of 2x30,000 bending strokes without damage, for
safety approval, whereas a drain wire would cut through the insulations during
the test. The LoRad is very flexible owing to the multiwire conductors. Each
conductor is made of 320 tin plated copper wires.
- LoRad stands for Low Radiation of electric and magnetic
alternating fields
- The screen protects your equipment from radiated mains
noise and from RF oick-up.
- Short pitch twisting of the cores cancels the magnetic
alternating fields.
- This will result in a cleaner sound and more accurate
transients.
The screen is ground connected via
a semi-conductive PE on the earth conductor. No drain wire needed. The green
part of the yellow/green earth conductor is of two different green nuances.
Please be aware that the darker green plastic is the semi-conductive part. It
must not touch any live part of the cord set. |
The earth conductor is semi-conductive! |
Tips and Tricks:
A simple way to check the cable radiation is to use an AC field
sensor. |
|
| Hold the AC-sensor against a cable and if it lights up
it means the cable is radiating noise fields. Of course, the cable must be
connected to the wall socket that is switched on. |
 |
Check Supra LoRad in the same way and you will find that
it does not in-dicate any noise radiation. Please make sure it is connected to
an earthed socket.
AC-sensors are available at Supra dealers or electrical
stores. |
 |
